| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
|
|
|
|||||||
|
|||||||||
* Geology Department, University of Vermont, Burlington, Vermont 05405
** United States Geological Survey, Reston, Virginia 20192
*** Lawrence Livermore National Laboratory, Livermore, California 94550
Analysis of 10Be and 26Al in bedrock (n=10), colluvium (n=5 including grain size splits), and alluvial sediments (n=59 including grain size splits), coupled with field observations and GIS analysis, suggest that erosion rates in the Great Smoky Mountains are controlled by subsurface bedrock erosion and diffusive slope processes. The results indicate rapid alluvial transport, minimal alluvial storage, and suggest that most of the cosmogenic nuclide inventory in sediments is accumulated while they are eroding from bedrock and traveling down hill slopes.
Spatially homogeneous erosion rates of 25 - 30 mm Ky–1 are calculated throughout the Great Smoky Mountains using measured concentrations of cosmogenic 10Be and 26Al in quartz separated from alluvial sediment. 10Be and 26Al concentrations in sediments collected from headwater tributaries that have no upstream samples (n=18) are consistent with an average erosion rate of 28 ± 8 mm Ky–1, similar to that of the outlet rivers (n=16, 24 ± 6 mm Ky–1), which carry most of the sediment out of the mountain range.
Grain-size-specific analysis of 6 alluvial sediment samples shows higher nuclide concentrations in smaller grain sizes than in larger ones. The difference in concentrations arises from the large elevation distribution of the source of the smaller grains compared with the narrow and relatively low source elevation of the large grains. Large sandstone clasts disaggregate into sand-size grains rapidly during weathering and downslope transport; thus, only clasts from the lower parts of slopes reach the streams. 26Al/10Be ratios do not suggest significant burial periods for our samples. However, alluvial samples have lower 26Al/10Be ratios than bedrock and colluvial samples, a trend consistent with a longer integrated cosmic ray exposure history that includes periods of burial during down-slope transport.
The results confirm some of the basic ideas embedded in Davis’ geographic cycle model, such as the reduction of relief through slope processes, and of Hack’s dynamic equilibrium model such as the similarity of erosion rates across different lithologies. Comparing cosmogenic nuclide data with other measured and calculated erosion rates for the Appalachians, we conclude that rates of erosion, integrated over varying time periods from decades to a hundred million years are similar, the result of equilibrium between erosion and isostatic uplift in the southern Appalachian Mountains.
This article has been cited by other articles:
|
|
 |
|
  A. Matmon, O. Simhai, R. Amit, I. Haviv, N. Porat, E. McDonald, L. Benedetti, and R. Finkel Desert pavement-coated surfaces in extreme deserts present the longest-lived landforms on Earth Geological Society of America Bulletin, May 1, 2009; 121(5-6): 688 - 697. [Abstract] [Full Text] [PDF]
|
|
|
|
|
|
K. L. Frankel, F. J. Pazzaglia, and J. D. Vaughn Knickpoint evolution in a vertically bedded substrate, upstream-dipping terraces, and Atlantic slope bedrock channels Geological Society of America Bulletin, March 1, 2007; 119(3-4): 476 - 486. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 G. Hancock and M. Kirwan Summit erosion rates deduced from 10Be: Implications for relief production in the central Appalachians Geology, January 1, 2007; 35(1): 89 - 92. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 A. M. Heimsath Eroding the land: Steady-state and stochastic rates and processes through a cosmogenic lens Geological Society of America Special Papers, January 1, 2006; 415(0): 111 - 129. [Abstract] [Full Text] [PDF]
|
|
|
|
|
|
RECENT PAPERS Geological Society of America Special Papers, January 1, 2006; 415(0): vii - xii. [Full Text] [PDF]
|
|
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
